I have been using the same metal for years and the sprues are short and 8 gauge , the burn out is good because the other rings are coming out I only have trouble with the one type of metal and have been using it forever. Anybody have any suggestions?
1). If u r burning out more than 1 ring at a time. Burn out this problem metal by it self you could have a cold spot in the burn out oven. Or have just overloaded the ovens ability .
2) if already burning out by its self increase the burn out temp by 100 degrees F. I have found this to help many labs
3) check your thickness measuring gauge making sure it still measures correctly, the wax pattern may have been to thin.
4) double check the metal is still the exact same
5). Go over all instructions making sure your doing it by the book Sometimes after doing something for a long time....See more By mistake something gets changed.
I hope I have helped :)
According to LMT's 2012 Wage Survey, technicians in the CAD/CAM department are seeing the biggest wage increases. For instance, an all-around CAD/CAM technician with six to 10 years of experience is now earning $19.79 per hour, $3.41 more than in 2010, and a CAD/CAM technician with 11-15 years of experience is now earning $21.06, a $5.07 boost.
LMT Original Research © 2010 - 2015
84 South Main St., Newtown CT 06470
203-426-4LMT · 203-491-2300 (fax)
LMT Communications delivers the business strategies, information, dental laboratory news and education that dental laboratory decision-makers need to succeed. Through LMT Magazine and our LAB DAY shows, LMT works to advance excellence in dental technology, enhance the products, services and communication of dental technicians, and give dental laboratory owners and managers the tools they need to flourish. Learn More »