-
Aaron Hoffman posted about Scanners and Zirconia
Cc: 3Shape, Inc.Educate me folks! We currently have a 3shape scanner/software. 1. What is your lab using for milling...(more)
-
Aaron Hoffman Musical Skills and Interests
Love listening and seeing the creativity from home! Thought I'd share what I've been putting together...(more)
-
Aaron Hoffman posted about LAB DAY Chicago 2013
-
Aaron Hoffman · Part Owner (I'd rather be in the trenches than a suit)
I told myself it would take an act of God to keep me from going to Lab Day '13............God acted like we needed 12" of snow, so no go. See you all next year:(
-
Aaron Hoffman · Part Owner (I'd rather be in the trenches than a suit)
Hey all, in each of your opinion, what plastic articulators give you great results with the greatest ease of set up? We currently use "artimax" articulators and were looking to find something possibly more efficient. Just tell me what you like, and please, nobody dog what someone else uses. Thanks, you're all awesome!
-
Aaron Hoffman · Part Owner (I'd rather be in the trenches than a suit)
Nobody would dog here, for a moment there, I must have thought I was on facebook:)
-
Dan O'Rourke · Owner, President
Hey Aaron, When I have to use them I use Orbix. They work fine for what they are.
-
Aaron Hoffman · Part Owner (I'd rather be in the trenches than a suit)
Thanks Dan, those are the kind of leads I'm looking for!
-
Mark Jackson, RDT · Owner
Depends on the case. We use Artimax for triple trays, and we use regular slotted Vertix for the cases we pin. Anything without a posterior stop goes on metal, as I have never found a plastic one I like.
-
Kim Molinaro · Managing Editor
Aaron- just as an aside to your question...our February LMT includes a comprehensive catalog of nearly 30 articulators so you can compare features side by side. Issue mails 2/8.
-
Aaron Hoffman · Part Owner (I'd rather be in the trenches than a suit)
I know what you mean Mark. EXCELLENT kim! I will check it out for sure!
-
Jack Jabbour · CEO & GM
for efficiency I like the monotrac system. decently accurate, and way easy! I've tried artimax and W.O.W. and they don't compare to monotrac.
-
Aaron Hoffman · Part Owner (I'd rather be in the trenches than a suit)
Never even heard of it! Sweet! I'll check it out, thanks Jack
-
Aaron Hoffman · Part Owner (I'd rather be in the trenches than a suit)
Thank$ Jack! They are $ending me $ome $amples, but I mu$t $ay, they $eem to like them a lot a$ well;)
-
Brett Butler · Owner, Ceramist
I have been using Artimax, and tried monotrac myself a few weeks ago. I easily could have liked the monotrac system, it seemed really clean and presentable...However, there was only one down side (and this is a personal preference)... Monotrac does not require any pins, which at first sounded nice, but I found myself missing the pin when I was handling the prep off of the articulator. Dipping into...See more
-
Aaron Hoffman · Part Owner (I'd rather be in the trenches than a suit)
Very good to know Brett. Certainly understand, kind of like working with a jammed pinky. You don't know how much you use something that small until you're without it:)
-
Patrick Eschenfelder · Dental Lab Technician
. . .I still love the old Vertex system. . .to me very easy to handle, and I beleive deliver a good result!
-
Linda Stevenson · Office Manager
Another vote for Monotrac, they are super easy, clean up nicely, and the quality of the product is very consistent.
-
Aaron Hoffman · Part Owner (I'd rather be in the trenches than a suit)
Linda, we just received our trial pack of monotracs. They look like they make a lot of sense, but monotrac also looks like they make a lot of money;) My girl that does our model work is going to try them out, and if she's clocking out at 2:00,.........who knows, might be worth it;)
-
Linda Stevenson · Office Manager
So, did she leave at 2:00?
-
Darrick Hartman · Lab Manager
monotrack, fastest most accurate and easy to use.
-
Aaron Hoffman · Part Owner (I'd rather be in the trenches than a suit)
@Linda-the 4 trial articulators they sent didn't make much of a dent in her day;) However, she DID like them and said they're as easy as it gets, and they did look great and seem to be firm and pretty accurate. If we make the transition to the monotrac, I'll make sure she's out by 2;)
-
Robert Swigart, CDT · In House Technician
I use Artimax as well, and have not found anything else that is as accurate and easy to use. It would be nice to find something similar that is less expensive,but if it ain't broke don't fix it.
-
Patrick Eschenfelder · Dental Lab Technician
. . .i still like the Vertex system . . .I agree there is room for error , but they are Simple ,and pretty quick , and they look good . . in any straight line articulator there is going to be 'room' for error
-
Michael Cohn · Owner
Have you guys tried our system? It's plastic, but reusable. Glueless, clicks on and off for easy scanning and readjustable so wrong articulation can be corrected on the fly.
-
Jack Jabbour · CEO & GM
do you send out any free samples Michael Cohn? if you do email me and I'll get you the info you need to send out a few. thanks
-
Michael Cohn · Owner
Being a system, with molds, articulators and sleeves (tips) you can reuse or replace, we offer a starter kit you can buy for very little money. If you don't like it, send it back for refund. That hasn't happened yet :)
-
-
Marta Lizza Musical Skills and Interests
Cc: Flemming Behrend, MDT and Aaron HoffmanHey Flemming...I thought you and Aaron might appreciate this....
-
Aaron Hoffman Musical Skills and Interests
Dude, Flemming, I new I liked you. I just posted my first original song to youtube. When you're done...(more)
"Come with Me" Song made with Cubase 6
http://www.youtube.com/watch?v=BXRO1fP0DEkThis is my first original song on YouTube using Cubase 6. All vocals, instruments, words, and tracks written and recorded by self. Please like, comment, and ...
Aaron Hoffman
Part Owner (I'd rather be in the trenches than a suit)
We are a 3 owner 8 employee CnB lab started in '81. Doing our best to please our Doc's and their patients all while rockin out to some internet radio having a good time!
About Aaron
We are a 3 owner 8 employee CnB lab started in '81. Doing our best to please our Doc's and their patients all while rockin out to some internet radio having a good time!
Work Info
Sunflower Dental Studio
Part Owner (I'd rather be in the trenches than a suit) · Lab Owner · Topeka, KSInterests
Products
LAB DAY Attendance
- Feb22-23
LAB DAY Chicago 2013
February 22nd - 23rd, 2013 · Sheraton Chicago Hotel & Towers
See AllAaron's Recent Activity
The Daily Bite
Directions in Digital Dentistry:
44% of LMT survey respondents say that since they’ve educated their dentists-clients about CAD/CAM-milled-restorations, they’ve started prescribing them. 36% say that thanks to marketing efforts on the part of manufacturers, their clients are well aware of CAD/CAM milling system options and are regularly prescribing the restorations.
LMT Original Research © 2010 - 2013
Judy Fishman · President/Publisher
Bummer Aaron! We are going to miss you! AND maybe we can at least post some photos live and offer news notes-we're going to try.
February 21 at 10:44 amAlwyn Naraine, CDT · Manager/ Ceramist
Aaron man, I thought we could have had a drink! Next time...Be safe with the snow
February 21 at 12:31 pmMarta Lizza · Owner, Ceramist
There's always next year Aaron. Enjoy the snow! Hey, IDS is coming soon.
February 21 at 2:23 pmLauren Meehan · Online Media Strategist
Sorry to hear that Aaron!! Come visit us in New York and Cali in April and May!
February 21 at 5:06 pm · 1 personMarta Lizza