Check out the video version!
Digital technology product lines continue to expand and this year’s attendees got the first look at new scanners, 3D printers, milling units and software options, as well as a host of new materials.
Read More 14 minute read
With LMT’s LAB DAY Chicago right around the corner—February 26 and 27—it’s time to finalize your plans to get the most out of our industry’s biggest, busiest show! Here’s a look at some of the special promotions, raffles and demonstrations available inside the LAB DAY Exhibit Hall.
Read More 11 minute read
- April 2015
At LMT LAB DAY Chicago, B&D presented its three latest innovations:
The Origin Proteus 5x is a five-axis milling machine for dry milling zirconia and wax/PMMA and wet milling titanium, CrCo, glass ceramics and implant blanks. It has a small footprint, features highly accurate servo motors and has a one-disc holder. Also available: a four-axis model with a two-disc holder.
The Origin SmartCrown™ System (previously known as ProActive Crown), a cavity-fighting crown. A zirconia crown is milled and pockets are created in the mesial and distal sides of the crown while in the green (soft) stage. The pockets are filled with resin-modified glass ionomer that releases cavity-inhibiting fluoride ions into the interproximal areas. B&D is working with multiple laboratories in order to establish them as certified SmartCrown partners to provide this patents-pending technology.
ORIGIN Beyond zirconia offers a translucency similar to lithium disilicate. It has esthetic qualities combined...
- November 2013
DENTAL TEAM: Scott Gallacher, Precision Milling Center, West Valley City, UT, and Steven Barker, DDS, Salt Lake City, UT
RESTORATIVE PROBLEM: The patient was missing a second bicuspid (#12), didn't want an implant crown and was also concerned about the reduction of the adjacent healthy teeth.
TREATMENT PLAN: To address the patient's desire for the most minimally invasive solution, the team opted for a full contour bridge with minimal retention, using ORIGIN LIVE Plus zirconia since the case required both high strength (for minimal enamel removal) and high translucency (for full contour). Dr. Barker prescribed a DigitalPrep™ WellBeing™ bridge, a system that allows him to create a digital prep using a 3D image of the pre-op model; the restoration is fabricated before the tooth is actually prepped in the patient's mouth.
FABRICATION PROCESS: Using DigitalPrep software, the distal area of tooth #11 was minimally reduced in the digital file and a retention groove was created. The...
- January 2013
From new ways to digitize workflows to product launches and enhanced equipment and software, the DLOACâs CAD/CAM Expo and Symposium was the place to be to learn about the latest in digital technology.
Read More 6 minute read
- May 2012
Attendees took advantage of two full days of clinics on Friday, May 4th and Saturday, May 5th, and were eager to shop exhibits on Saturday. In fact, the exhibit hall was already bustling with crowds
- April 2012
LAB DAY 2012 could easily be labeled "The Reinvention Convention." Laboratory owners and managers are more engaged than ever in finding new ways to reinvigorate their businesses
Read More 2 minute read
- January 2012