Forums
Welcome to The BRIDGE, an online network from LMT dedicated exclusively for members of the Dental Laboratory community.
- March 2012
Impression Scanning Recommendations?
Is anyone out there using impression scanning at their lab and how are the models coming out? Which system? Models printed or milled? Have you compared them to the same impression poured by your traditional method? Can anyone verify if it is really saving them time and/or money?
1watcher17views2posts
Dennis Opp
Owner/Technician
See AllRelated Commentary
-
Matt Paton Monomer Fumes and Air Quality
Several things.....
1. Make sure you store opened containers and acrylic mixing bowls in a dark airtight...(more) -
Jesse Flor, CDT and Esperanza Hempel posted to A Lab / Dental Office Partnership?
-
Jesse Flor, CDT · Owner
There is a danger and a benefit to this situation because its a friend whos offering this opportunity. The most common problem I have seen as a consultant is the Dr requiring more attention than you initially expect. I would make sure you have a contract - Ideally one where you define it as a lease of...See more
- Lawrence Novero
Lawrence Novero likes this -
-
-
Lauren Meehan LMT/Bridge Announcements
Last Chance to Register for LAB DAY East!
Registration Closes on Tuesday, April 2nd at 10:00am EST
...(more)
LAB DAY East 2013
Discover products, techniques and services that can enhance your skills, boost your productivity and create all new opportunities for your business.
