Ivoclar Vivadent Inc. is on LMTmag.com!
LMTmag.com is an online network from LMT dedicated exclusively for members of the Dental Laboratory community. Join free to connect with Ivoclar Vivadent Inc..
Rafael Choi, CDT, describes his technique for using IPS e.max Press Multi to eliminate the need for layering methods and produce esthetic, lifelike anterior crowns in a predictable and efficient manner.
As part of our ongoing State of the Industry 2015 coverage, LMT Editors visited the world’s largest dental show to bring you the scoop on the latest product and process innovations worldwide—including digital dentures, laser milling and more—and what else is coming down the pike for the U.S. market.
Read More 21 minute read
Ivoclar launched IPS e.max Press MT lithium disilicate ceramic ingots for pressing that are in the medium translucency range, closing the gap between the HT and LT ingots. The monochromatic MT ingots are intended for restorations requiring a significantly higher brightness level than HT restorations. Given their reduced chroma, these ingots offer room for creativity to individualize the cervical region of restorations and achieve a natural-looking transition between dentin and enamel.
The IPS e.max Press MT ingots are available in two sizes in selected Bleach BL and A-D shades; can be used with...
In the company’s ballroom at LAB DAY Chicago, Ivoclar Vivadent’s Ted Smudde (left) congratulates Brandon Walsh, an in-house technician at Wing, Mack and Smith in Newark, OH. Walsh was the lucky winner of an Ivobase-System, a fully automated press injector worth nearly $10,000.
Although balancing esthetic outcomes and fulfilling the doctor’s desires for the most robust restorations has been a challenge, Chris Roman, CDT, has seamlessly integrated the new IPS e.max Multi from Ivoclar Vivadent into his daily workflow.
Rejuvenation dentistry is an approach based on a model of health that considers not only a patient’s teeth but the entire masticatory system, including jaw joints, nerves and head and neck muscles, and maintains that problems occur when these components aren’t working in biological harmony.
Read More 2 minute read
- November 2014
Jeff Smith, CDT, offers a step-by-step look at how to fabricate esthetic, monolithic restorations in a single press sequence with subsequent glazing using Ivoclar Vivadent’s new IPS e.max Press Multi.
- September 2014
The challenging aspect of this case was that one of the implants was improperly placed between #7 and #8. Steve Lee explains how he made a screw-retained zirconia framework with pink gingiva tissue to recreate the lost gingiva and then cemented on four single crowns made from IPS e.max to the framework.
- June 2014
Bart Hyde, Hyde Dental Prosthetics in Fallon, NV, took first place in the 2014 North American Art of Denture Competition. Hyde offers a step-by-step look at his winning entry and his creative thought process.
- April 2014
“The dental industry is rapidly changing,” said Robert Ganley, CEO of Ivoclar Vivadent, during the company’s Experience Innovation event on Friday night in Chicago. “We believe these changes will point the dental industry in a more digital direction with an emphasis on consistent high-quality materials, processes and results. With collaborative partnership and strong leadership, we can connect to the heartbeat of innovation and see improved efficiencies and growth throughout our profession.”
Highlighting the event was the worldwide launch of the new Wieland Zenotec®...
Read More 2 minute read
All day Friday, the LB Promenade was buzzing with LAB DAY attendees trying to get a look at the display of 28 entries in the second North American Art of Denture (KunstZahnWerk®) Competition, sponsored by Ivoclar Vivadent and LMT.
During the Friday afternoon award ceremony, Sarah Anders, Ivoclar Vivadent’s new Senior Vice President of North American Sales, was on hand to congratulate the winners. “The Art of Denture Competition allows us to celebrate the incredible skills of dental technicians from across North America. The winners continue to amaze us with their abilities and creativity,”...
- January 2014
The female patient was previously restored with less than ideal esthetic and functional results. When the old restorations were removed, the canine preps were very dark.
- November 2013
DENTAL TEAM: Janet Jones, CDT, Technical Consultant, Ivoclar Vivadent and Jenny Sy-Munoz, DDS, MSD, University at Buffalo, Buffalo, NY
RESTORATIVE PROBLEM: A 36-year-old patient presented with a request to have teeth #30 and #31 restored as recommended by his general dentist. These molars had existing large pin-retained amalgam buildups that were starting to show signs of occlusal wear.
TREAMENT PLAN: Dr. Sy-Munoz prescribed monolithic crowns made from Zenostar full contour zirconia because of its strong physical properties, pleasing esthetics and optimal biocompatibility.
- October 2013
In January, Vinnie Verderosa, CDT, MDT, Stony Brook University School of Dental Medicine, spent nine days working with the Giving Through Smiles Foundation in Neltume, Chile, a remote logging village in the foothills of the Andes Mountains. He was the only technician in a 10-person team from New York, including prosthodontists and dentists. They joined forces with dentists and dental students from a university in Chile to fabricate 50 dentures and treat 150 children with rampant tooth decay.
A clinic was set up in the lunchroom of a school, along with two rooms for denture work. The volunteers...
- August 2013
To celebrate the work of highly skilled denture technicians and elevate the status of the specialty, Candulor is sponsoring its second North American "Art of Denture" Competition, inviting U.S. and Canadian technicians to fabricate fully removable upper and lower dentures supported by locators.
- May 2013
Zirconia-reinforced materials are a new trend, and expanded options for pre-colored zirconia and ceramics for full contour restorations offer both efficiency and esthetics. Plus, a new type of material: a biocompatible, millable resin on which the final restoration can be built; there's no need for casting or pressing.
Read More 4 minute read
- April 2013
All-ceramics, implants, profit erosion and other hot topics inspired dialogue during the biggest weekend of the year.
Read More 6 minute read
"Our business will continue to change to meet new demands. It's less about the ability to manage change and more about the strength to lead change," said Ivoclar Vivadent's CEO Bob Ganley during his State of the Industry address to the more than 700 attendees at the 87th Annual Cal-Lab Meeting held at the Westin Michigan Avenue.
One development Ganley discussed is the growing irrelevance of geographical barriers due to new technology and the increasing competition between labs because of it. "You must understand who you are and have some kind of identifiable message on how you differentiate yourself....
More than 300 industry personnel came together for Ivoclar Vivadent's Leading the Future event on Friday night in Chicago. Held at the Fairmont Chicago Millennium Park Hotel, the evening showcased the company's partnerships and innovations that are shaping the future direction of dentistry.
"This is an exciting time in dentistry, with so much potential for growth and innovation," said Ivoclar Vivadent CEO Robert Ganley. "Our future success will depend upon leadership, collaborative partnerships and forward-based thinking," said Ganley, referring to Ivoclar Vivadent's recent acquisition of Wieland...
- February 2013
Furniture manufacturers and distributors offer a wealth of design and renovation strategies. Here, seven companies share how they helped their laboratory customers realize their vision, whether it was an intimate 600-sq-ft training laboratory or a bustling 83,000-sq-ft operation.
Nobilium (CMP) Installs 33 Workbenches in Louisiana Laboratory
In 2011, Custom Dental Arts in Shreveport, LA, wanted to expand from its 2,500-sq-ft space so it purchased a 6,000-sq-ft facility located across the street. Lab Owner Ben Hart wanted to renovate the space, customize its layout and purchase new benches,...
Read More 6 minute read
- January 2013
Proper calibration and spruing techniques are just two of the ways to ensure you're getting the most accurate results with Ivoclar VivadentÂ¹s Programat® Pressing Furnaces.
Read More 3 minute read
- September 2012
Since launching AvaDent Digital Dentures last fall, Global Dental Science has milled close to 2,000 arches. The dentures are currently being marketed directly to dentists; a laboratory partnership model is in the works.
"With AvaDent Digital Dentures, we are changing the entire fabrication process for removable prosthetics. This digital platform reduces processing time for the patient and dentist; improves fit, function and esthetics; and has tremendous future potential for implants, immediate dentures, bars and integration with cone beam CT scans," says Andy Jakson, Vice President of Clinical...
Read More 3 minute read
- May 2012
Attendees took advantage of two full days of clinics on Friday, May 4th and Saturday, May 5th, and were eager to shop exhibits on Saturday. In fact, the exhibit hall was already bustling with crowds