Products
Welcome to The BRIDGE, an online network from LMT dedicated exclusively for members of the Dental Laboratory community.
A1614 Microwave Sintering Oven
Micro Sintering Solutions · Equipment
The A1614 Microwave Sintering oven from SINTERING-OVENS.COM is designed for high-production labs that need to turnaround cases or remakes quickly. Microwave sintering vibrates the inside and outside molecules...See more
Accel-21 Furnace
KDF U.S., Inc. · Furnaces · Equipment
The new cost-friendly Accel-21 porcelain furnace from KDF U.S. delivers delicacy and beauty to porcelain. With even distribution of heat, its muffle chamber fires porcelain with quality and consistency....See more
BruxZir FastFire Furnace
Glidewell Laboratories · Equipment
GLIDEWELL DIRECT's easy-to-operate BruxZir FastFire Furnace is specially designed for sintering milled BruxZir Solid Zirconia restorations. Featuring a new, higher-efficiency design, it offers four molybdenum...See more
Ceramill Argotherm® Furnace
Amann Girrbach America · Equipment
AMANN GIRRBACH AMERICA's new Ceramill Argotherm sinter furnace was specifically developed for its new Sintron® CrCo blank for non-precious metal restorations. The patented core of the system is the...See more
Ceramill Therm Furnace
Amann Girrbach America · Furnaces · Equipment
The Ceramill Therm furnace from AMANN GIRRBACH AMERICA provides high-performance, high-temperature and fully automatic programmable settings for the final sintering of stress-free zirconia frameworks....See more
DC100 Sintering Furnace
Vision USA, a Dentrex Co. · Equipment
Developed for zirconia ceramics, the DC100 from VISION USA is fully programmable and has a maximum continuous operating temperature of 1,600°C for highly translucent zirconia. It incorporates an industrial-grade...See more
Dekema Austromat baSiC® Furnace
Available from JENSEN DENTAL, Dekema's Austromat baSiC sintering oven features even temperature management and heat distribution and quality thermocouples and heating elements. Featuring innovative technology,...See more
William Kikuta, CDT likes this
Dekema Austromat® 654 Furnace
Available from JENSEN DENTAL, Dekema's Austromat 654 is a combination pressing/firing furnace that offers accurate temperature control, timing and plunger travel management. It also offers quality heating...See more
EX-3 Speed Enamel
Kuraray America, Inc. · Consumables
Specially developed for the two-layer buildup technique for PFM restorations, the Noritake EX-3 Speed Enamel creates a beautiful opalescent effect and precise shades similar to natural enamel. Esthetic...See more
Fortress Porcelain
Mirage Dental Systems · Consumables
From MIRAGE DENTAL SYSTEMS, Fortress Porcelain is an all-ceramic system for crowns, inlays, onlays and veneers. It's a high-strength porcelain with leucite particles from 3- to 4-microns in size, making...See more
GC Initial& IQ POM One Body Concept
GC America, Inc. · Consumables
GC Initial IQ POM (Press Over Metal) from GC AMERICA is a feldspar-based, pressable ceramic system for conventional porcelain alloys (CTE/WAK range of 13.8-14.9). It's part of a new concept of pre-blended...See more
GC Initial™
GC America, Inc. · Consumables
GC Initial from GC AMERICA consists of six ceramics in one integrated product line with one color system and can be used for metal-ceramic and full-ceramic restorations. No longer does the ceramist have...See more
HotSpot 110 Furnace
Zircar Zirconia, Inc. · Equipment
ZIRCAR ZIRCONIA offers the HotSpot 110 zirconia sintering furnace in two models: 1,600°C rated and 1,700°C rated. They are openly programmable and easy to install and use. The chamber holds two...See more
HT Speed by Mihm Vogt Furnace
The HT Speed by Mihm Vogt from ZUBLER USA features 90-minute zirconia speed sintering cycles as well as regular cycles. It has six MoSi2 heating elements, a maximum temperature of 1,650°C and quality...See more
ICE Zirconia Ceramic
Zirkonzahn USA, Inc. · Consumables
ZIRKONZAHN's ICE Zirconia Ceramic has a flexural strength of approximately 90MPa and a CTE value of 9.6 that doesn't change even after repeated firings, eliminating the danger of cracks. The set contains...See more
Jack Garcia, CDT likes this
IMAGE-Press Furnace
Imagination Technologies · Equipment
IMAGINATION TECHNOLOGIES' new IMAGE-Press combination press/porcelain furnace is designed for pressing all materials, including lithium disilicate, and bakes all low- and high-fusing porcelains along with...See more
inFireHTC Speed Furnace
Sirona Dental Systems LLC · Furnaces · Equipment
SIRONA's inFire HTC Speed is a high-speed, high-capacity sintering furnace that now offers even more indications and material choices including sintering milled cobalt-chrome substructures and full contour...See more
LHT 02/17 LB Speed Furnace
NABERTHERM GmbH's LHT 02/17 LB Speed furnace is perfectly suited for sintering translucent zirconia up to 1,650°C. It has an Integrated Speed Cooling System and special heating elements made of molydenum...See more
LHT 03/17 D Furnace
NABERTHERM GmbH's LHT 03/17 D is a high-temperature chamber furnace ideal for sintering translucent zirconia units up to 1,650°C. It offers ease of operation and special molybdenum discilicide heating...See more
Luminesse HF
TALLADIUM's Luminesse HF high-fusing porcelain offers excellent translucency and color to produce optical properties that mimic natural teeth. The organic pigments allow you to precisely layer the correct...See more
Luminesse ZR
TALLADIUM's Luminesse ZR is a high feldspathic-content veneering porcelain and an ideal match for all zirconia or lithium disilicate substructures. The translucency, brightness and opalescence of this...See more
Master S Furnace
KDF U.S., Inc. · Furnaces · Equipment
The Master S Series from KDF U.S. features a newly developed quartz spiral heater that offers excellent muffle heat distribution and steady heat rise. It minimizes metal frame twisting, allowing users...See more
-
Mirage Porcelain
Mirage Dental Systems · Consumables
Mirage Porcelain from MIRAGE DENTAL SYSTEMS can be used for all of your fine ceramic work. It offers color flexibility, strength, lifelike esthetics and consistency.
Multimat® NTX & NTXPRESS
DENTSPLY Prosthetics · Equipment
From DENTSPLY PROSTHETICS, the Multimat NTX & NTXPRESS porcelain furnaces from are made in Germany, feature a modern design and provide consistent firing results. The improved PC program software permits...See more
Noritake EX-3 and CZR Value Shades
Noritake Value Shades are additional shades that expand the existing EX-3 and CZR selection of Body and Opacious Body porcelain powders to include the VITA 3D-Master shades. They offer "out-of-the-bottle"...See more
OneShot Unilayer Porcelain
Shofu Dental Corp. · Consumables
OneShot Unilayer Porcelain, from SHOFU DENTAL, is a next-generation ceramic material that improves productivity and esthetic outcomes with a simplified, single-powder build-up process. An extension to...See more
Origin® DuoTron™ Pro Furnace
B&D Dental Technologies · Equipment
The Origin DuoTron Pro from B&D DENTAL TECHNOLOGIES provides fast zirconia sintering and production speeds, while decreasing production costs. Different sintering modes are also available. You can sinter...See more
Pearson II Porcelain
Pearson Dental Supply · Consumables
PEARSON DENTAL SUPPLY's Pearson II Porcelain offers ease of handling and modeling and immediate, accurate shades with translucency and color depth. It offers an extremely stable CTE of 13.8, and is compatible...See more
Prismatik NetPress™
Glidewell Laboratories · Consumables
Prismatik NetPress, from GLIDEWELL LABORATORIES, is a pressed ceramic system for metal-based restorations offering a flexural strength of 110 MPa. The incisal is pre-blended with dentin to save valuable...See more
Prismatik ThinPress™ Pressed Ceramic
Glidewell Laboratories · Ceramics · Consumables
GLIDEWELL LABORATORIES' Prismatik ThinPress is a pre-blended leucite-reinforced pressed ceramic, ideal for minimal-prep and no-prep veneers. An extra-high-strength ceramic blend offering a flexural strength...See more
Pro 200 Porcelain Furnace
The Pro 200 Porcelain Furnace from WHIP MIX is affordable and designed with cutting-edge technology. It has advanced cycles for IPS e.max®, In-Ceram®, Wol-Ceram®, Captek™, sintered alloys...See more
Programat® EP 5000 Furnace
Ivoclar Vivadent Inc. · Equipment
IVOCLAR VIVADENT's Programat EP 5000 combination press and ceramic furnace features an electronic press drive with sensor technology, Intelligent Press Function and QTK heating muffle technology for equal...See more
Programat® S1 Furnace
Ivoclar Vivadent Inc. · Equipment
The Programat S1 furnace from IVOCLAR VIVADENT sinters single-tooth zirconia restorations in only 75 minutes. It's compact and lightweight with a heating element designed for intensive everyday use. The...See more
ProPress 200 and ProPress SP Furnaces
The ProPress 200 and ProPress SP from WHIP MIX are designed for cutting-edge pressing. Both furnaces have advanced cycles for IPS e.max® and Captek. The ProPress SP monitors the glass flow, sensing...See more
Reflex Dimension One and Zenoflex Dimension One
Wieland Dental Systems · Consumables
WIELAND's Reflex Dimension One for metal ceramics and Zenoflex Dimension One for zirconium oxide are true one-powder, one-layer, one-bake porcelain systems. In addition, modifiers previously used only...See more
Sensation SL® Low Fusing Ceramic System
American Dental Supply, Inc. · Ceramics · Consumables
AMERICAN DENTAL SUPPLY's Sensation SL is a multi-purpose porcelain system designed for high CTE alloys as well as the popular Cerpress SL® Pressable Ceramic System. It is a low-fusing, leucite-reinforced...See more
Silhouette® Porcelain
American Dental Supply, Inc. · Porcelain · Consumables
From AMERICAN DENTAL SUPPLY, Silhouette Porcelain System's fine grain structure and CTE of 13.5-13.9 (25°C-500°C) allow it to be fired on a wide range of alloys. Its handling characteristics and non-greening...See more
SinterMax T1700 LE Furnace
Micro Sintering Solutions · Furnaces · Equipment
From SINTERINGOVENS.COM, the new all-digital SinterMax T1700 LE features two-hour sintering of zirconia copings and the higher temperatures needed for maximum translucency of full contour zirconia. It...See more
Summit Porcelain Furnace
Ibex Dental Technologies · Equipment
With its Radiance Ring muffle design, the Summit porcelain furnace from IBEX DENTAL TECHNOLOGIES delivers an even, homogenous band of energy within its chamber to provide consistent shade fidelity in fired...See more
Summit Press
Ibex Dental Technologies · Equipment
Sharing the same features as the conventional Summit furnace, the Summit Press from IBEX DENTAL TECHNOLOGIES was designed specifically to press e.max® materials. It features an elevated pressing platform...See more
Tizian Sintering Furnace
Schütz Dental Group, Inc. · Equipment
SCHÜTZ DENTAL's Tizian sintering furnace uses six high-quality MoSi2 heating elements to sinter zirconia ceramics up to 1,600°C. Inner insulation ensures low power consumption and it's equipped...See more
TiZian™ Porcelain System
Schütz Dental Group, Inc. · Consumables
SCHÜTZ DENTAL GROUP's TiZian porcelain can be used on zirconium or titanium substructures and is free of feldspar for high transparency and esthetics, even after multiple firings. The combination of particle...See more
Triceram Ceramic
Dentaurum · Ceramics · Consumables
DENTAURUM's Triceram Ceramic for zirconia and titanium offers a high bond strength and short, simple firing without slow cooling to save time and money. Restorations retain their high stability of shape...See more
Vario Press 300.e Furnace
Zubler USA, Inc. · Furnaces · Equipment
The Vario Press 300.e from ZUBLER USA has an Advanced Press for lithium disilicate; this patented feature cuts up to 60% off the total cycle time and prevents reaction layer formation. Other features include:...See more
Vintage Art
Shofu Dental Corp. · Consumables
Vintage Art from SHOFU is a highly fluorescent, ready-to-use porcelain stain for internal and external staining techniques. It offers excellent application and cover characteristics due to its ultra-fine...See more
Vision Solera
Vision USA, a Dentrex Co. · Consumables
The "Injection Precision Cut" grain structure makes Solera from VISION USA a fast-building porcelain for ceramic restorations, including veneers. This high-fusing porcelain is ideal for use with silver-containing...See more
Vision Zirkon
Vision USA, a Dentrex Co. · Consumables
VISION USA's Vision Zirkon Porcelain for milled zirconia copings provides excellent shade matching accuracy. Its exact CTE settings and excellent adhesion result in optimum performance on different zirconium...See more
VITA VM9
Vident, a VITA® Company · Consumables
VITA VM 9 from VIDENT is a high-fusing, fine-structure feldspar ceramic for zirconia substructures available in VITA Classical and 3D-Master shades. The CTE is precisely adjusted to zirconium dioxide materials,...See more
VITA® VMK Master
Vident, a VITA® Company · Consumables
VITA VMK Master from VIDENT is a metal ceramic porcelain suitable for veneering all types of alloys, including non-precious, and is available in VITA Classical and 3D-Master shades. The layering process...See more
Jack Garcia, CDT likes this
VITA® Zyrcomat 6000 MS Furnace
Vident, a VITA® Company · Equipment
The VITA Zyrcomat 6000 MS sintering furnace from VIDENT is capable of sintering up to 25 units as well as nine-unit bridges in 80 minutes starting from room temperature. The furnace has been rigorously...See more
- 161 Products
LAB DAY Chicago 2013
February 22nd - 23rd, 2013 · LAB DAY Chicago · Sheraton Chicago Hotel & Towers - 159 Products
- 56 Products
- See All
See AllRelated Commentary
-
Ayman Hassab, DMD Full Contour Wax Patterns
it is great high scientific clinincal work.A lot future demands
-
John Sullivan, CDT Sirona inLab MC XL
Im involved with inlab and not happy with were they are going with the support they are giving to the...(more)
-
Glenn Kennedy 5-Axis DWX-50 Milling Machine
Lets get this topic started! What is 5 axis and why would you want it?
Simply put, 5 axis milling gives...(more)
