GC Initial IQ POM (Press Over Metal) from GC AMERICA is a feldspar-based, pressable ceramic system for conventional porcelain alloys (CTE/WAK range of 13.8-14.9). It's part of a new concept of pre-blended...See more effect ingots in combination with the three-dimensional Lustre Pastes that exhibit vitality and a natural glaze in one bake. The standardized, compact system is easy to use, offers high accuracy and productivity and reduces remakes.
GC Initial from GC AMERICA consists of six ceramics in one integrated product line with one color system and can be used for metal-ceramic and full-ceramic restorations. No longer does the ceramist have...See more to spend valuable time learning to use a myriad of different ceramics to create a variety of restorations. The CTE and other properties of each GC Initial ceramic is adapted to its particular fabrication process and framework.
GLIDEWELL LABORATORIES offers several opportunities for growing your lab, including becoming an authorized BruxZir™ Lab and outsourcing BruxZir Solid Zirconia restorations by sending model work,...See more a scan or a digital design file to Glidewell, or by purchasing blanks or a BruxZir Mill and milling your own restorations. Through the Certified Inclusive® Labs program, you can join the network of providers who guarantee the strict quality of the Inclusive line of precision-milled custom abutments, bars and implant components. Labs can also become an authorized Comfort H/S™ Bite Splint Lab, quickly producing high-quality bite splints using genuine Erkodent materials and equipment. All partner labs enjoy monthly marketing support.
GPS Abutments from IMPLANT DIRECT are available in both straight and angled (15° and 30°) options for many of the most popular implant systems. Compatible with Zest Anchors' LOCATOR® attachments,...See more they come with an internal cap attachment that maintains 100% retention at 10° rotation. All-in-one packaging includes abutment, transfer, metal housing with nylon liner, spacer, processing male and comfort cap.
The SHENPAZ Gemini Lite Press porcelain furnace enhances productivity with its twin table technology. Its pivoting mechanisms automatically remove the finished work from the firing zone. The furnace fires...See more normal and press ingot ceramics with constant temperature and press control. Technical specifications: maximum working temperature 1,180°C/2,156°F; full electrical recovery, includes press kit with cylinder sizes 100g and 200g plus two plungers; and special e-base cylinder base adaptable to IPS e.max® products.
AURIDENT's GH is a high noble, fine-grain, type III crown and bridge gold alloy containing 52% gold, 0.1% platinum, 8.0% palladium and 21.5% silver. Castings with a rich gold color can be produced at a...See more lower cost than higher gold content alloys, without compromising quality. Excellent mechanical properties make GH suitable for single units and bridges. The alloy is easy to cast and work with, resistant to tarnishing and can be efficiently used by either high- or low-production laboratories. You also earn six Aurident Rewards Points for each ounce of GH alloy ordered.
Located in Costa Mesa, California, GC ADVANCED TECHNOLOGIES (GCAT) milling center, currently offers custom CAD/CAM abutments in zirconia and titanium as well as zirconia copings and bridge frameworks up...See more to six units. All GCAT zirconia products are available in 10 different shades and require a three-day, in-house turnaround time.
GC AMERICA's GC Initial IQ-One Body, Layering-Over-Metal concept increases productivity by allowing you to reproduce all 16 standard Vita® shades with a single-layer application. In this simple and...See more economical one-powder-build ceramic system, the four new Body materials can be combined with three-dimensional Lustre Pastes then applied using the "paint by numbers" technique to achieve consistent, esthetic results. The GC Initial IQ system is compatible with the existing MC/Initial range and many alloys.
Thinking about purchasing a new CAD/CAM machine? Or maybe you are researching different types of abutments available. The Products section is the go to spot to research products, read peer reviews and share a review of your own.
Have a product that's not listed here? Add it and you can start aggregating discussions around it!
Designed with simplicity and versatility in mind, IPS e.max is the ultimate in metal-free esthetics and durability...See more offering high-strength materials for both the PRESS and the CAD/CAM technique.
84 South Main St., Newtown CT 06470
203-426-4LMT · 203-491-2300 (fax) info@LMTmag.com
LMT Communications delivers the business strategies, information, dental laboratory news and education that dental laboratory decision-makers need to succeed. Through LMT Magazine and our LAB DAY shows, LMT works to advance excellence in dental technology, enhance the products, services and communication of dental technicians, and give dental laboratory owners and managers the tools they need to flourish. Learn More »