Welcome to The BRIDGE, the social and information hub of the dental lab industry. Connect with industry peers and vendors, ask questions, sign up for events, review products, read LMT articles and industry news and more!
Get answers from the knowledgable community
Yesterday at 12:12 pm
Anyone have any advice on zirconia bridge frameworks "warping"? Hardly ever happens with frameworks with no curve, but seems to be more frequent with 4 unit and larger frames that curve (anterior). Individual units fit terrific internally and marginally, but 2-3 out of 10 times the frames will rock slightly. We are sintering...
November 21 at 1:04 pm
I need to add two more people that are attending from our lab. How do I do that? I tried the add people option but it failed
November 20 at 5:32 pm
I have availability to work on applying the ceramic on your frames. My build up utilizes similar methods as Oliver Brix. Multiple layer application with life-like anatomy. High end results with less chair time for the patient. Please contact me if interested. Thank you, Stephan Kresse
November 18 at 12:23 pm
I was wondering if anyone could offer suggestions for a good cast metal frame lab that can handle 50+ frames per month? Need someone with consistency and ability to follow script instructions. Thanks ahead of time for your help.
November 17 at 1:37 pm
PTC DENTAL SCHOOL IN CALIFORNIA
October 29 at 10:14 pm
can anyone specify the type of biostar sheet i can use for making clear aligner for minor tooth movements
biostar sheet foer minor tooth movemnts
October 21 at 3:52 pm
i have a f.u.d. and lower partial, i want/need both replaced and looking for someone to work 'with' me, for fit and appearance.
October 21 at 3:01 pm
Interested in designing partials with our 3 Shape scanner. Wondering about who can make the patterns and what is the best wax printer - miller available.
3 Shape Printing Wax partial designs
October 18 at 5:48 pm
i need to find a billing program from a dental lab to a dentist
October 17 at 9:46 am
options for a one tooth maryland bridge
October 15 at 10:41 am
I want to know everything about lab management
October 7 at 6:13 pm
I am looking for an implant course. Any suggestions?
October 3 at 11:49 pm
I know what you are going to say...
October 1 at 9:51 pm
Hi. I'm wondering if I should use FDA approved implant parts? Is that a U.S. law? ex) implant Ti-base, Screws, Titanium.. Zirconia disk...
September 26 at 8:09 am
Our lab uses Sirona's inLab MCXL for milling, and have had some issues with milling zirconia crowns. We are having problems with marginal chipping during the milling process. When a prep doesn't allow much space for the margin thickness we usually bulk it out a bit, but that creates a lot of extra grinding time. But...
September 17 at 7:36 am
Can a 3Shape scanner "talk" to a Kavo Everest CAD/CAM system, or do I need to spend money on more software?
Any and all advice is appreciated!
September 14 at 11:32 am
Jensen HT Zirconia
August 2 at 6:52 am
Does anyone know of national/study groups pertaining to bio-occlusion concepts?
July 30 at 10:31 am
Casting process video
July 24 at 8:02 am
Hello! It seems the holes where the water shoots out onto the burs of our milling unit are clogged and make the water shoot off in other directions or not at all. Any suggestions on how I can clean these out? Also, suggestions on cleaning out the chamber in general? Thanks :)
July 19 at 11:33 am
multimat ntx dentsplay do modelo novo se um forno recomedado fazer prensagem com qualidade
July 19 at 9:23 am
One of our doctors would like to start sending us scans through E4D Sky to design with our 3Shape. Has anyone tried this before? We're trying to work through some bugs, and I would love to pick someone's brain. Thanks!
July 15 at 12:54 am
lately we have been thinking about going digital. One of our accounts has sirona chair side and was asking if we are looking into srona in lab -connect where as another account has the 3shape. in case we decide to go with sirona connect what are the comparability with other systems that are out there. Thank you
July 11 at 11:46 am
We are located in Twin Falls, ID looking for a waxer willing to relocate. If you know if anyone, please have them call us at 800-574-0721 for the details. Thanks.